wePresent SNMP Manager - Manual (Page 5)

5 SNMP Manager and FTP Firmware Upgrade Instructions
2.4 Firmware Upgrade Setup
You can use the “firmware upgrade setup” to upgrade multiple or single device.
Please input required information into these columns.
t Host Address: configure the FTP address.
t Port Number: configure the FTP port number.
t Account: configure the FTP login account.
t Password: configure the FTP login password.
t Firmware upgrade: set “1” value to start upgrade.
t Upgrade Status: show the upgrade status. Please refer to the following table.
t Download Progress: show download progress.
» Upgrade status list:
Status Description
-16 [FTP]download file fail
-15 [FTP]Transfer a copy of the file. The URL is wrong or the file isn't existing!
-14 [FTP]can't get the file size.
-13 [FTP]fail to tells the server to enter "passive mode".
-12 [FTP]login to the ftp server fail
-11 [FTP]connect to the ftp server fail
-10 [FW Upgrade] Kernel Version is Different
-9 [FW Upgrade] invalid customization name
-8 [FW Upgrade] write flash error
-7 [FW Upgrade]erase flash error
-6 [FW Upgrade]flash open error
-5 [FW Upgrade]checksum error
-4 [FW Upgrade]version wrong
-3 [FW Upgrade]Invalid FW file
-2 [FW Upgrade] parse header file fail
-1 [FW Upgrade]upgrade file not find
0 upgrade complete and system reboot
1 [FTP]downloading file
2 [FTP]download complete
3 [FW Upgrade]upgrading
255 none