Xtramus LES-5160 V1.2 - Manual (Page 32)

32
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
3.1.5. LES-5160 Management Webpage – Maintenance
Four options are available in the Maintenance configuration webpage: Upgrade Firmware, Save
Changes, Set Factory Defaults and System Reboot.
A. Update Firmware
This function is used to upgrade the firmware of the management card and the Cat-5e cable
simulation modules. There are three modes for this function, including Management Card, Single
Subcard, and Multi Subcards.
a. Management Card
This mode is to upgrade the firmware of management card.
Management Card
Browse…
Click the
Browse… button to choose the firmware file you would like to
upgrade. LES- 5160’s firmware files are in the format of “*.bin”.
Apply Click this button to start upgrading LES- 5160’s firmware.
b. Single Subcard
This mode is to upgrade the firmware of a single XLE-C5E module.
Single Subcard
Slot ID
Click the scroll down menu to select the module you want to upgrade firmware
on.
Browse…
Click the Browse… button to choose the firmware file you would like to
upgrade. LES-
5160’s firmware files are in the format of “*.bin”.
Apply Click this button to start upgrading LES-
5160’s firmware.
c. Multi Subcard
This mode is to upgrade multiple XLE-C5E modules at the same time. The system will upgrade
the firmware of the selected modules in sequence.