Zektor Clarity Prowler™ - Manual (Page 2)

3 H OW TO USE AUDIO / VIDEO
BREAKAWAY
1 Press the VID / AUD button until the
channel to break away is the only LED
that is lit.
2 LED s indicate what channels will
switch when remapping zones:
• If only the
VID LED is lit, then only the
video channel will switch.
• If only the AUD LED is lit, then only
the audio channel will switch.
       
AUDIO VIDEO MATRIX SWITCH
AUD
VID
MEM 1 2 3 4
CLR 5 6 7 8 ENT 1 2 3 4 5 6 7 8
1
2
P RESS UNTIL DESIRED LED ’ S ARE LIT
W HEN LED IS LIT , CHANNEL WILL SWITCH
4 H OW TO ADJUST VOLUME / TONE /
EQUALIZER CONTROLS
1 Press and release the POWER button, the
display will fill with dashes ‘-’.
2 Press the ‘1’ button to adjust volume
and tone settings.
3 Use the ‘4’ and ‘8’ buttons to raise and
lower the volume settings.
4 Use the zone buttons to switch between
zones.
5 Use buttons MEM , 1, 2, 3, 5, 6, 7, ENT ,
and VID / AUD to choose between
volume and tone adjustments:
•
MEM = Balance
• 1 = Volume
• 2 = Bass
• 3 = Treble
• 5 = Eq1 (100Hz)
• 6 = Eq2 (330Hz)
• 7 = Eq3 (1000Hz)
• ENT = Eq4 (3300Hz)
• VID / AUD = Eq5 (10000Hz)
6 Press and hold the ‘1’ button to select
the Master Volume for all zones.
7 Press the CLR button to set balance,
tone and equalizer settings to zero.
8 Press the POWER button to return to
normal.
       
AUDIO VIDEO MATRIX SWITCH
AUD
VID
MEM 1 2 3 4
CLR 5 6 7 8 ENT 1 2 3 4 5 6 7 8
1
2
P RESS AND RELEASE
P RESS TO ADJUST
VOLUME AND TONE
TO ENTER SETUP
3
U SE 4 & 8 TO RAISE
AND LOWER LEVELS
       
AUDIO VIDEO MATRIX SWITCH
AUD
VID
MEM 1 2 3 4
CLR 5 6 7 8 ENT 1 2 3 4 5 6 7 8
4
S WITCH
BETWEEN
ZONES
6
5
5
7
C HOOSE BETWEEN VOLUME
AND TONE ADJUSTMENTS
C HOOSE BETWEEN VOLUME
AND TONE ADJUSTMENTS
P RESS AND HOLD FOR MASTER VOLUME
P RESS TO ZERO BALANCE , TONE
8 P RESS TO RETURN TO NORMAL
AND EQUALIZER SETTINGS