Denon DN-C680 - Manual (Page 6)

• 19 inch Rack Mountable (Height 3U)
• Large FL Display, Illuminated Rubber Button
• Track Search Select knob (Easy track selection)
• Jog/ Shuttle Wheel
Perform searches to 1 frame precision using the jog dial and easy scans using the shuttle ring.
• Program Play (Max. 25 tracks)
(1) When the PLAY mode is set to Single, the player stands by at the beginning of next track. (at Finish mode Next)
(2) When the PLAY mode is set to Continuous, the playback is continued according to your programmed sequence.
• Play mode and Finish mode
(1) Play mode
c
Continuous: Play a whole disc
d
Single: Play a track
e
A-B: Play a A-B
(2) Finish mode (Stop, Next, Recue)
* only when Single Track play is selected.
c
Stop: Stop after finishing to play a track.
d
Next: Standby at the beginning of next track after finishing to play track.
e
Recue: After finishing to play a track, standby at the beginning of the track.
• Auto Cue
After a disc is loaded, it is automatically cued to the point where audio starts. Cueing takes place at the point where audio starts rather than where the track
starts. The level at which sound is first detected can be set between -36 to -72dB (7 steps).
• End Monitor
Pressing the END MON button during standby instantly previews the end of the track, thus assuring perfect "end point". The point at which monitoring starts can
be set within a range of 5 to 35 seconds (7 steps) prior to the track's end.
• End of Message (EOM)
At the end of a track, the Display's EOM button flashes, providing a visual warning to the operator that the track will end shortly. The point at which the flashing
begins can be set within a range of 0 to 30 seconds (7 steps) prior to the end of the track.
• Pitch Control (t 9.9%, 0.1 % step) e Index Search
The Select knob can be used to perform an Index Search when the INDEX button is ON. (The LED on the INDEX button light up.)
• AUTO SPACE
During playback, it is possible to insert a silent space of about 4 seconds between tracks. To do this, simply press the AUTO SPACE button to ON.
(The LED on the AUTO SPACE button light up.)
• AUTO EDIT
This function automatically divides the total recorded time on the disc in half and rearranges the track so that they fit nearly onto the A and B sides.
• Display of Playback Locations
A bar graph display indicates playback points on the track being played. Elapsed time and Remaining time displays are switched using the TIME button.
• Rich Array of External Control Terminals
Serial Remote (RS232C/RS422A switchable, D-sub 9 pin) Parallel Remote (D-sub 25 pin)
• ACD-25FSC (FS Converter Kit) Option
Digital output is possible at 32 and 48 kHz as well as 44.1 kHz. Output frequency can be preset to 32, 44.1, or 48 kHz.
The DN-C680 CD player is a rack mount type CD player designed for use in broadcast stations, for production; etc.
MAIN FEATURES
7