Adtec digital edje-5110 (version 01.02.05) Quick Start - Manual

720 x 480 29i 15.00M
1MU 192K 2DD 192K 48
Front Panel Status
Video Resolution Frame Rate Video Bit Rate
Audio Input 1 & 2 Sampling Rate
System
Login
Duration
Network
Time
NTP
Alarm
COM2
Firmware
Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and enter to save selection.
Encoder
Video
Encoder
Audio
Transmit PIDS Table Profile
Profile 1-10
Encrypt. *
Mode
Clear Word
Encrypt Word
User ID 1
UserID 2
Mux Rate
Vid. AutoFill
IP Destination 1-4
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
‘User Login -- logged out’
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
Quick Start Guide Standard Definition MPEG2 Encoder
Getting Started
Thank you for your purchase of the Adtec edje-5110. This quick
start guide should help you with your initial setup. Further instructions
are available via the manual integrated into the on-board software. You
can view it by looking for the HELP tab once your unit is powered up and
you are connected to the web-application.
See back for more details.
This manual and the most recent firmware are available on our support
website, www.adtecinc.com. Advanced users can also find direct API
command help as part of the on-board web application.
Front Panel LEDs:
System LED Status
Power
Power is OFF
Power is ON
Alarm
No System Alarm
Minor Alarm
Major Alarm
Link
No Link Detected
Link Active
Busy
No Network Traffic
Network Traffic Present
Aux
Not Currently Used
Broadcast Quality MPEG 2 Encoder
5110
Adtec Digital has adopted zero-configuration networking
technology, streamlining the setup and configuration processes for our
products. The use of this technology enables automatic discovery of Adtec
devices and services on an IP network. Used in tandem with the new
web-based control and configuration applications, we can now provide
one-click access to any device.
By using the built-in Bonjour® locator in the Apple® Safari® browser or
the plug-ins readily available for Internet Explorer® or Firefox® browsers,
users can locate all of the Adtec devices on a network via serial number or
custom name. Browse, Click, Control - it's that simple.
* Optional Feature
Sample Freq.
A1 A2
Mode Mode
Sync
Input
Mode
Type
Bitrate
Volume
Table
VBI Source
Closed Cap.
Service Name
Adtec Digital Technical Support: 615.256.6619 www.adtecinc.com 06.09.2011
PCR
Prog. No.
Map PID
Vid. PID
Aud.1 PID
Aud. 2 PID
TS ID
AMOL
Splice
VITC Mode
VITC PID
Status
Rate
Chroma *
Input
GOP
GOP Str.
GOP Size
Hue
Bright.
Contr.
Satur.