AGI Security SYS-4HNVR304 Quick Guide - Manual (Page 12)

USER INTERFACE
7
3. USER INTERFACE
3.1 Local
3.1.1 Device Status
Note: The functions shown may vary based on the model or the access user level you use.
Key lock Key unlock
Channel lock Channel unlock
USB flash drive / device connected No USB device connected
Timer record on Timer record off
Overwrite on
Overwrite off
Sequence mode on Sequence mode off
PTZ mode on PTZ mode off
Backup event queued and USB flash drive needed USB flash drive full
CPU loading
Network Status:
(WAN) Internet connected (WAN) Internet disconnected
(WAN) Local connection
(LAN) Auto mode –Mbit/s
(LAN) Auto mode – Gbit/s
(LAN) DHCP / Static IP mode (LAN) Camera disconnected
3.1.2 Channel Status
Note: The functions shown may vary based on the model or the access user level you use.
Auto search on Auto search off
Original size Fit to screen
Live audio on Audio off Audio playback on Audio playback off
Recording PTZ control Alarm event Motion event
Live information Playback information
Digital zoom Channel Playback
Quick camera control
3.1.3 Quick Operation
Move to the arrow mark to extend the quick menu bar and show the four functions as follows:
Click to show the channel switch panel and select the channel you want.
Click to display the playback control panel, and click to play the latest recorded video clip, or click to enter the search
list.
Click to open the IP search window and check the current connection status of each channel.
Click to show the power off panel to either halt or reboot the system.