Delta TP08G - Manual

Warning
 Please read this instruction carefully before use.
Switch off the power before wiring.
The display panel of TP05G and TP08G is waterproof. But please prevent grease, corrosive liquids and sharp
objects from contacting the TP05G and TP08G.
The TP05G and TP08G require 24VDC input power. DO NOT connect input AC power supply to any of the RS-485
communication port; otherwise serious damage may occur. Check all the wiring again before switching on the
power.
DO NOT touch any terminal when the power is switched on. DO NOT touch any internal circuit in 1 minute after the
power is switched off.
Make sure the ground terminal is correctly grounded in order to prevent electromagnetic interference.
Please use the fixed support accessory which is packed together with the product provided by Delta. DO NOT
tighten the screws out of the normal torque specifications; otherwise serious damage may occur.
Introduction
Explanation & Peripherals
Thank you for choosing Delta TP Series. TP05G (BS2/BT2) has the features of high resolution 160×80 dots.
When the font is Traditional Chinese character and the font size is 8, TP05G (BS2/BT2) is able to display 14×7
Chinese character; TP08G (BS2/BT2) has the features of high resolution 240×128 dots. When the font is
Traditional Chinese character and the font size is 8, TP08G (BS2/BT2) is able to display 21×11 Chinese
character. Both of them provide multilingual display and two built-in communication ports, one is for RS-232 and
the other is for RS-485/RS-422. RS-232 and RS-485 can be used simultaneously. Besides, they also support
built-in RTC, communication/alarm indication LED, etc. functions. Besides, the users can purchase program
copy card (optional) to copy settings and programs quickly and save download time. Regarding the editing
software, there are various objects and images for various users’ requirements. Please ensure to use TP series
with Delta power supply module, DVPPS01 and DVPPS02.
Product Outline
Power LE D Indicator
Al ar m LED Indicat or
Di splay Area
Function K eys
Escape/E xi t Key
Ar row K eys
Numeric K eys
Enter Key
Multi pl e Function Keys
Function Specifications
Model
Specifications TP05G (BS2/BT2) TP08G (BS2/BT2)
Screen Type / Display
Color STN-LCD / Monochromatic
Case Color BS2: White color, BT2: Black color
Backlight The back-light automatic turn off time is 1~99 minutes (0 = do not turn off)
(The back-light life is about 50 thousand hours at 25°C)
Resolution 160×80 dots 240×128 dots
Display Range 83mm(W)× 41mm(H);
3.8” (diagonal preferred)
78mm(W)× 41mm(H);
3.8” (diagonal preferred)
Contrast Adjustment 10 levels of adjustment
Language/Font
ASCII: (Code page 850) Alphanumeric (including European characters)
Taiwan: (Big 5 codes) Traditional Chinese Fonts
China: (GB2324-80 codes) Simplified Chinese Fonts
5 × 8 dots 32 characters × 10 rows 48 characters × 16 rows
8 × 8 dots 20 characters × 10 rows 30 characters × 16 rows
8 × 12 dots 20 characters × 6 rows 30 characters × 10 rows Display Text
8 × 16 dots 20 characters × 5 rows 30 characters × 8 rows
ENGLISH
Model
Specifications TP05G (BS2/BT2) TP08G (BS2/BT2)
Font Size ASCII: 5Ч8, 8Ч8, 8Ч12, 8Ч16
Alarm LED Indicator (RED)
1. Power on indication (Blink for three times)
2. Communication error alarm
3. Special indication by user programming
Program Memory 1024KB flash memory
Serial Communication Port
RS-232(COM1)
Unsynchronized transmission method: RS-232
Data length: 7 or 8 bits, Stop bits: 1 or 2 bits
Parity: None/Odd/Even, Transmission speed: 9,600bps~115,200bps
RS-232: 9 PIN D-SUB male
Extension Communication
Port
RS-422(COM1)
RS-485(COM2)
Unsynchronized transmission method: RS-485 / RS-422
Data length: 7 or 8 bits, Stop bits: 1 or 2 bits
Parity: None/Odd/Even, Transmission speed: 9,600bps~115,200bps
RS-422: 9 PIN D-SUB male, RS-485: 6-Pin removal terminal
Battery Cover DC 3V battery for HMI
Extension Interface 1. Update firmware version
2. The slot for program copy card
6-Pin Removal Terminal Include DC 24V input and RS-485 communication input
Electrical Specifications
Model
Specifications TP05G (BS2/BT2) TP08G (BS2/BT2)
Display Monochromatic STN LCD
Effective Display Area 83mm(W)× 41mm(H); 3.8” (diagonal
preferred)
78mm(W)× 41mm(H); 3.8” (diagonal
preferred)
Display Resolution 160Ч80
5Ч8 dots 32 characters × 10 rows
8×8 dots 20 characters × 10 rows
8×12 dots 20 characters × 6 rows
8×16 dots 10 characters × 5 rows
240Ч128
5Ч8 dots 48 characters × 16 rows
8×8 dots 30 characters × 16 rows
8×12 dots 30 characters × 10 rows
8×16 dots 30 characters × 10 rows
LCD Contrast Adjustment Set by Software, adjust the contrast by the press button in the function table
LCD Backlight Type LED Backlight: Automatic Turn-off Setting
Function / Numeric Keys 0~9,F1~F5, ESC, ± , CLR, ←, ‧,SHIFT, ENTER and Arrow Keys (UP, DOWN )
External Input Power 24V (1.8W Max.)
Memory Capacity 1024K Byte
CPU ST STR710RZT6
RAM of System 64K Byte
Communication Interface COM1: RS-232/RS-422 COM2: RS-485
Waterproof Class of Front
Panel IP66 / NEMA4 / UL Type4 indoor
Operating Temperature
for Hardware 0~50°C; 20-90% RH (non-condensing)
Storage Temperature for
Hardware -20~60°C
Vibration 5Hz ≦f＜9Hz = Continuous: 1.75mm / Occasional: 3.5mm
9Hz ≦f≦150Hz = Continuous: 0.5g / Occasional: 1.0g
Shock 15g peak, 11ms duration, half-sine, three shocks in each direction per axis,
on 3 mutually perpendicular axes (total of 18 shocks)
Radiated Emission CISPR11, Class A
Electrostatic Discharge
Immunity EN61000-4-2
Radiated Immunity EN61000-4-3
Electrical Fast Transient EN61000-4-4
Weight / Dimensions 0.43kg; 210Ч122Ч45mm (Width(W) × Height(H) × Deep(D))
Cooling Method Natural Air Cooling
Dimension and Installation
Product Outlook and Dimensions (Units: mm, [ ]: inch)
Back Panel
6-Pin Terminals:
Wire Gauge:12-24 AWG / Torque:4.5 lb.-inch
Front Panel and Right Side Diagram
210 [8.2677]
1 2 2 [ 4 .8 0 3 1 ]
45 [1.7717]
1 0 8 .2 6 [ 4 .2 6 2 ]
Mounting Dimensions (Panel Cutout) Vertical View
196.26 [7.7266]
3 7 .5 [ 1 .4 7 6 4 ] 7 .5 [ 0 .2 9 5 3 ]
Installation
Please insert TP05G/TP08G to the opening hole of panel and tighten the screws. However, if a firm mounting
TP05G/TP08G to the panel is needed, please use the mounting fixed support accessory which is packed
together with TP05G/TP08G, then insert the fixed support in the back and tighten the screws. Please refer to
the following sections for correct installation. ( If the fixed support is not installed well, Delta will not
guarantee the waterproof function. The screw torque should be 4-5(kg-cm). DO NOT exceed this specification
when tightening the screws; otherwise TP05G/TP08G may be damaged.)
Do not install and mount TP05G/TP08G in the following environment.
A location subjected to Airborne dust, metallic particles, oil and smoke, corrosive or flammable
gases and liquids.
A location where temperature and humidity will exceed specifications.
A location where vibration and shock will exceed specifications.
The flat surface should be a UL Type 4 “Indoor Use Only” enclosure or equivalent (IP66/NEMA4). Please
refer to the figures below.
Installation Method of Insert Module
Password Function
If the users forgot the password, the password can be cleared by using the following code: 8888 . This
universal code will clear the password and all TP05G/TP08G internal programs. The TP05G/TP08G will be
reset to the factory settings. Please pay close attention when using it. The password can be the alphabet from
A to Z or the number from 0 to 9. But it must use the function keys F0~F5 to input the password characters.
Please refer to the following table.
Function Key Use Method Function Key Use Method
Numeric Key 0 ~ 9 F3 Scrolls in a loop as follows
J→K→L→M→N→O→P→Q→R
F1
This key is left direction key and it can
be used to select the position of the
value.
F4 Scrolls in a loop as follows
S→T→U→V→W→X→Y→Z
F2 Scrolls in a loop as follows
A→B→C→D→E→F→G→H→I F5 It can be a right direction key in the
system menu.
Hardware Operation
When the users want to startup TP05G/TP08G, a 24VDC power is needed. After applying 24VDC power to
TP05G/TP08G, it will enter into the startup display and then enter the user-designed program. Pressing Esc
key and holding on for 5 seconds can return to system menu. There are five selections in the system menu
and are described below.
SELECTIONS EXPLANAION
Download
Program
Use the connection cable (DVPACAB530) to connect the TP05G/TP08G serial communication
port RS-232 to a PC. Then use the TPEditor software to download an application program to
TP05G/TP08G.
Upload Program
Use the connection cable (DVPACAB530) to connect the TP05G/TP08G serial communication
port RS-232 to a PC. Then use the TPEditor software to upload an application program from
TP05G/TP08G.
Copy Program
Transfer a program between two TP05G/TP08G units.
1: Transmit Program ; 2: Receive Program
When transmit programs and data between two TP05G/TP08G units. Set one TP05G/TP08G to
“Receive Program” mode and the other TP05G/TP08G to “Transmit Program” mode. Please use
twisted pair wires to connect the two units via the RS-485 ports.
TP05G/TP08G
Settings
There are 8 items that used to modify TP05G/TP08G system settings:
1. Communication protocol: Setting the address of TP05G/TP08G, and the communication
string for either RS-232 or RS-485.
2. Contrast: Adjust the contrast of LCM display screen.
3. Back-light: adjust the automatic turn off time of LCM. Setting range is 00~99 seconds. If set
to 00, the LCM Back-light will not turn off.
4. Date and Time: It is used to set the TP05G/TP08G built-in RTC including year, month, day,
hour, minute, second and week. Also the internal battery capacity display is shown here.
5. Buzzer: Used to set the buzzer sound, normal mode or quiet mode.
6. Language Setting: Used to set the displayed language. English, Traditional Chinese,
Simplified Chinese or user-defined language.
7. Password setting: Used to set, enable, and disable the password function. If the password
function is enabled, it will require the user to input a password before entering any system
menu. The factory password is
1234 .
8. Startup Display: Used to select the TP05G/TP08G startup display. User can select “user
defined” to use the file that designed by TPEditor software and download to TP05G/TP08G.
PLC Connection
There are three methods to connect to PLC:
1. Using TP05G/TP08G serial communication port (COM1) RS-232: set 8-pin DIP switch to
RS-485 mode and connect the cable (DVPACAB215 or DVPACAB230) to program
communication I/O RS-232C of PLC.
PLC Connection
2. Using extension communication port (COM2): set 8-pin DIP switch to RS-485 mode and
connect 5-pin removal terminal of extension communication port to RS-485 of PLC with
twisted pair.
3. Using extension communication port (COM1): set 8-pin DIP switch to RS-422 mode and
connect four pins (6, 7, 8, 9) of 9 PIN D-SUB male to RS-422 of PLC with 4-wire cable.
Execution
Execute the internal program that download from TPEditor software or transmitted from other
TP05G/TP08G units. When program is in execution, the user can return to system menu by
pressing Escape/Exit (Esc) key for 5 seconds.
Communication Connection
TP05/08G may connect to a PC by using connection able DVPACAB515
PC or TP05/08G
1
5
6
9
9 PIN D-SUB
TO PC (RS-232) TO TP05/08G
5
1
9
6
9 PIN D- SU B
9 PIN D-SUB female
R x 2
GND 5 5 GND
PC COM Po rt
9 PIN D-SUB fe ma le
3 T x 2 R x
TP05/0 8G COM Port
Tx 3
TP05/08G may connect to a DVP-PLC by using connection cable DVPACAB215/ DVPACAB230 /
DVPACAB2A30
1. DVPACAB215 ／DVPACAB230
TO PC or TP05/08G
1
13
14
1
5
6
9
25 PIN D-SUB
9 PIN D-SUB
TO PLC
MINI DIN TERMINAL
2. DVPACAB2A30
TO PC or TP05/08G
1
5
6
9
9 PIN D-SUB
TO PLC
MINI DIN TERMINAL
8 PIN MINI DIN 25 PIN D-SUB female PC/TP COM Port PLC CO M1 Port
Tx 2
GND 7
8 PIN MINI DIN 9 PIN D-SUB female PC/TP COM Port PLC CO M1 Port
4 Rx
8 G ND
Rx 2 GND 5
1,2 5V
1 2 3 4 5
6 7 8
1 2
3 4 5
6 7 8
4 Rx
8 G ND
1,2 5V
6
8
20
4
5
1
4
6
7
8
5 Tx Rx 3
Tx 3 5 Tx
TP05G/08G The Pin definition of 9 PIN D-SUB
1. RS-232
3 Tx
5 GND
RS-232 9 PIN D-SUB male
TP05/08G COM Port
2 Rx
2. RS-422
8 Tx +
RS-422 9 PIN D-SUB male
9 Tx -
TP05/08G COM Port
7 Rx - 6 Rx +
3. DVPACAB630 (RS-422)
TO TP05/08G
1
5
6
9
9 PIN D-SUB
TO PLC
MINI DIN TERMINAL
8 PIN MINI DIN 9 PIN D-SUB female TP05/08G COM Port MITSUBISHI FX-PLC
Rx - 7 Tx+ 8
1 2
3 4 5
6 7 8
7 Tx+
2 Rx+ Tx - 9 3 SG GND 5
Rx+
COM1 Port RS-422
6 4 Tx -
1 Rx -
Switch between RS-422 / RS-485 (by using 8-PIN DIP switch)
8-PIN DIP switch RS-485 RS-422
SW1 ~ SW4 On Off
SW5 ~ SW8 Off On
Battery Life and Precision of Calendar
Timer
Battery Life
Precision of Calendar Timer
1. At 0°C/32°F, less than -117 seconds error per month.
2. At 25°C/77°F, less than 52 seconds error per month.
3. At 55°C/131°F, less than -132 seconds error per month.
Temperature (°C) -20 0 20 60
Life (Year) 1.972 2.466 2.712 2.835
注意事項
請在使用之前，詳細閱讀本使用說明書。
實施配線，務必關閉電源。
本機顯示操作面板防水，但對油污或具腐蝕性之液體不具防護作用，避免以尖銳之物品刮傷面板使用時請注
意。
本機輸入電源為直流 24V，不可連接於 RS-485 通訊口信號端，否則可能造成嚴重的損壞，因此請在上電之前
再次確認電源配線。
輸入電源切斷後，一分鐘之內，請勿觸摸內部電路。請勿在上電時觸摸任何端子。
本體上之接地端子 務必正確的接地，可提高產品抗雜訊能力。
利用原廠包裝附件之固定架，鎖緊面板固定螺絲時，請勿太緊以免造成機殼損壞。
產品簡介
說明及週邊裝置
謝謝您採用台達文本顯示器系列產品。TP05G (BS2/BT2) 為解析度 160×80，當字體為新細明體字體大小 8 時，
可顯示 14×7 個中文字的文本顯示器；TP08G (BS2/BT2) 為解析度 240×128，當字體為新細明體字體大小 8
時，可顯示 21×11 個中文字的文本顯示器。兩者皆支援多國文字顯示，以及內建兩個通訊口（RS-232 及 RS-485
／RS-422 ，其中 RS-232 與 RS-485 可同時使用）。並內建萬年曆、通訊／警告指示 LED 等功能。使用者可另
購外接程式複製單元，快速移植程式，節省程式下載時間。軟體規劃部份更提供多種物件圖形可供使用者選用。
請搭配台達 DVPPS01，DVPPS02（電源模組）一起使用。
產品外觀及各部介紹
顯示區
功能鍵
警示指示燈
電源指示燈 退出/取消鍵
命令操作鍵
數值鍵
輸入鍵
複合功能鍵
功能規格
功能規格
機型
規格 TP05G (BS2/BT2) TP08G (BS2/BT2)
螢 幕 / 色 彩 STN-LCD / 單色
外 殼 顏 色 BS2 ：白色，BT2：黑色
背 光 背光自動關閉設定範圍 1 ~ 99 分鐘（設定值 0 為不關閉）
（在常溫 25℃下壽命約 5 萬小時）
解 析 度 160 ×80 點 240 ×128 點
顯 示 範 圍 （W）×（H）= 83×41（單位：mm）；
3.8 吋（對角線）
（W）×（H）= 78×41（單位：mm）；
3.8 吋（對角線）
對 比 調 整 10 段明暗調整
語 言 字 型
ASCII ：（頁碼 850）文字（包含歐洲字型）
台灣：（BIG 5 碼）繁體字型
中國：（GB2324-80 碼）簡體字型
5 ×8 畫素字型 32 個字×10 列 48 個字×16 列
8 ×8 畫素字型 20 個字×10 列 30 個字×16 列
8 ×12 畫素字型 20 個字×6 列 30 個字×10 列
顯示的
文字數
8 ×16 畫素字型 20 個字×5 列 30 個字×8 列
繁體中文
字 型 大 小 ASCII ：5Ч8，8Ч8，8Ч12，8Ч16
警 示 指 示 燈 （ 紅 燈 ） 電源啟動指示（亮／滅三次）／通訊不通警示／使用者程式指定
程 式 記 憶 1024KB 快閃記憶體
串 列 通 訊 埠
R S - 2 3 2 （ C O M 1 ）
非同步傳送方式：RS-232
資料長度：7 或 8 個位元，停止位元：1 或 2 個位元
極性：None／Odd／Even，傳送速度：9,600bps ~ 115,200bps
RS-232 ：9 PIN D-SUB male
擴 充 通 訊 埠
R S - 4 2 2 （ C O M 1 ）
R S - 4 8 5 （ C O M 2 ）
非同步傳送方式：RS-485／RS-422
資料長度：7 或 8 個位元，停止位元：1 或 2 個位元
極性：None／Odd／Even，傳送速度：9,600bps ~ 115,200bps
RS-422 ：9 PIN D-SUB male
RS-485 ：6Pin 脫落式端子
電 池 蓋 可由此更換人機直流 3V 電池
擴 充 介 面 更新韌體版本、程式複製卡插槽
6 P i n 脫 落 式 端 子 包含直流電源 24V 輸入及 RS-485 通訊輸入
電氣規格
機型
項目 TP05G (BS2/BT2) TP08G (BS2/BT2)
顯 示 器 單色 STN LCD
顯 示 面 積 （W）×（H）= 83×41（單位：mm）；
3.8 吋
（W）×（H）= 78×41（單位：mm）；
3.8 吋
顯 示 解 析 度 160Ч80
5 Ч8
8 Ч8
8 Ч12
8 Ч16
英文字
英文字
英文字
英文字 32 ×10 字
20 ×10 字
20 ×6 字
10 ×5 字
240 Ч128
5 Ч8
8 Ч8
8 Ч12
8 Ч16
英文字
英文字
英文字
英文字 48 ×16 字
30 ×16 字
30 ×10 字
30 ×8 字
L C D 對 比 調 整 軟體設定，使用功能表內按鍵調整
L C D 背 燈 型 式 LED 背燈：自動關閉設定
功 能 鍵 ／ 數 字 鍵 0 ~ 9，F1 ~ F5，ESC，±，CLR，←，‧，SHIFT，ENTER 及方向鍵（UP， DOWN）
外
接 電 源 24V （1.8W Max.）
記 憶 體 容 量 1024K Byte
中央處理單元 （CPU） ST STR710RZT6
系 統 R A M 64K Byte
通 訊 介 面 COM1 ：RS-232／RS-422 COM2：RS-485
前 面 板 防 水 等 級 IP66 ／NEMA4／UL Type4 indoor
硬 體 使 用 溫 度 0 ~ 50 ℃；相對濕度 20 - 90﹪RH（不可凝結）
硬 體 儲 藏 溫 度 -20 ~ 60 ℃
耐 震 動 5Hz ≦f＜9Hz 連續：1.75mm／非連續：3.5mm
9Hz ≦f≦150Hz 連續：0.5g／非連續：1.0g
耐 衝 擊 15g peak ，11ms，半弦波，X, Y, Z 軸正負各 3 次，共 18 次
R F 輻 射 測 試 CISPR11 ，Class A
靜 電 放 電 測 試 EN61000-4-2
耐 R F 輻 射 度 測 試 EN61000-4-3
高 頻 暫 態 測 試 EN61000-4-4
重 量 ／ 外 型 尺 寸 0.43kg ；210Ч122Ч45mm（寬（W）× 高（H）× 厚（D））
冷 卻 方 式 空氣對流自然冷卻