Amina ALF40 - Manual (Page 6)

Positioning the ALF40
04
Free Standing
The ALF40 can be positioned anywhere within a room and in any orientation. A location near the
corner of a room will give the most bass output however it is important to allow the bass port to
breathe. Do not place any solid objects closer than 50mm (2”) directly in front of the port. Adhere the
supplied rubber feet to the cabinet, this will protect the product from dirt and scratches when
positioned on the floor.
Fixing Brackets
Use the supplied brackets to secure the ALF40 to a solid structure. Use only the supplied, 12.3mm
screws to fix the brackets to the cabinet. Never use longer screws as these may damage the unit’s
internal components. Ensure the brackets are not fixed over the port plate, blanking plate or connection
terminal.
Concealed Placement
The ALF40 can be placed within furniture, behind wall panelling or even within a ceiling cavity.
Whatever structure you install the ALF40 inside, it is important to create a suitable hole for the port to
protrude through allowing it to breathe into the listening room.
Use the brackets and screws provided to secure the ALF40 within the structure.
In-Ceiling
The illustration on the next page shows how the brackets supplied can be used to fix the ALF40 to a
ceiling joist.
Notice the port protrudes from the cabinet - this allows it to then protrude through a suitable hole cut in
the plasterboard ceiling layer.
The supplied Port Trim may be placed over the port opening to improve its appearance, (this is
detailed on the next page).
Alternatively a suitable lighting fixture bezel may be used in a similar way. The Port diameter dimension
of 43mm is designed so it is the same dimension as a GU10 light bulb, this will help when fitting a
lighting fixture bezel. Ensure any fixtures used are securely fitted to avoid audible vibrations.
Note:
When using a lighting fixture bezel, be sure not to position it as part of the lighting pattern as this will
result in a dark patch within the room.