Analog Way BROAD SCAN - Ref. BSC730 Programmer's Guide - Manual (Page 5)

4 = 30 Hz 5 = 50 Hz
6 = 59.94 Hz 7 = 60 Hz
XR XR Synchronization mode selection. Rd/Wr 0 2 0 = internal.
1 = genlock.
2 = frame lock
XH XH H Phase genlock adjustment Rd/Wr 32722 32814
XS XS SC phase genlock adjustment Rd/Wr 0 1023
OZ OZ Output type selection. Rd/Wr 0 2 0 = RGBS.
1 = RGsB (SOG).
2 = YUV.
EP EP Pedestal (NTSC output only) Rd/Wr 0 1 0 = OFF 1 = ON
OP OP Test pattern selection. Rd/Wr 0 4 0 = no test pattern. 1 = grey scale
2 = color bar 3 = grid
4 = SMPTE
NOTE: Rd = Read only command / Commande de lecture. Rd/Wr = Read and write command / Commande de lecture et d'écriture.