Analog Way Optimizer HD - OHD888-AG - Manual (Page 15)

OPTIMIZER HD Chapter 3 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)
PAGE 15
3-5. FUNCTIONS DESCRIPTION
 [INPUT]
 [Input status]
Indicates the status of the selected input.
 [DVI Input]: DVI input selection.
Select the DVI input type between one of the following items:
 [DVI RGB 0/255]
 [DVI RGB 16/235]
 [DVI YUV]
 [ SDI Input] : SDI input selection.
 [ Analog Input]
Select the Analog input type between one of the following items:
 [auto detect]: The input format is automatically detected.

[ SDTV Composite]
 [ SDTV Y/C]
 [ Video RGBS]
 [ Video RGsB]
 [ Video YUV]
 [H sync load]
Select the Horizontal sync load of your input signal.
 [VCR mode]
This function allows improving the image contour of low quality VHS tapes.
 [OUTPUT]
 [Status]
Displays the output status.
 [ Output format]
Output format selection.
 [Genlock]: Output format synchronized onto the signal connected to the genlock input.
 [480i]  [576i]
 [480p]  [576p]
 [720p]  [1035i]
 [1080i]  [1080p]
 [ Output rate]
Output rate selection.
 [23.97 Hz]  [24 Hz]  [25 Hz]
 [29.97 Hz]  [30 Hz]  [50 Hz]
 [59.94 Hz]  [60 Hz]
 [Frame lock]: The output frame rate is synchronized onto the frame rate of the signal connected to the
genlock input.
 [ Output DVI]
Select one of the following output type.
 [DVI components]: Then select RGB or YUV.
 [DVI dynamic]: Then select 0-255 or 16-235.
 [Test pattern]
Select one item.
 [Off]: turns OFF the test pattern.
 [Grey Scale]: Displays onto the output a grey scale pattern.
 [Color bar]: Displays onto the output a color bar pattern.
 [Grid]: Displays onto the output a grid pattern.