Anthony Gallo Reference 3 S.A. Amp - Manual (Page 8)

Anthony Gallo Acoustics Reference³ SA Specifications @4ohm
Output power: 240 watts stereo, 650 watts mono
Distortion: 0.08% stereo, 0.1% mono (low-pass @ 100Hz, level and xover at max, EQ at 0dB)
0.1% stereo, 0.17% mono (full-range, level at max)
Input sensitivity: 130mV stereo, 110mV mono
Signal-to-Noise: 93dB stereo, 83 mono (low-pass @ 100Hz, level and xover at max, EQ at 0dB)
91dB stereo, 75dB mono (full-range full-rated power @ 1kHz)
Bass EQ: 1W @ 35Hz (100Hz=0dB, level and xover at max, booster at 6dB) = 6.2dB
1W @ 35Hz (100Hz=0dB, level and xover at max, booster at –3dB) = -3.2dB
Frequency response: 15 - 200Hz low-pass (100Hz=0dB, level and xover at max, booster at 0dB)
<10Hz – 28kHz full-range (100Hz=0dB, level and xover at max, booster at 0dB)
Crossover: 40Hz low-pass, xover setting at minimum
200Hz low-pass, xover setting at maximum
Auto-on sensitivity: 5mV
Current draw:
9A stereo, 13.5A mono (level and xover at max, booster at 0dB)
Temp. protect: 60°C +/-5