Aplex Technology ARCHMI-707 - Manual (Page 52)

50
COM6：
(2.0mm Pitch 2X5 Pin Header), COM6 Port, up to one standard RS232 port are provided. They can
be used directly via COM cable connection.
Signal Name Pin# Pin# Signal Name
DCD 1 2 RXD
TXD 3 4 DTR
Ground 5 6 DSR
RTS 7 8 CTS
JP6 Setting：RI/5V/12V 9 10 NC
COM5：
(2.0mm Pitch 2X5 Pin Header), COM5 Port, up to one standard RS232 port are provided. They can
be used directly via COM cable connection.
Signal Name Pin# Pin# Signal Name
DCD 1 2 RXD
TXD 3 4 DTR
Ground 5 6 DSR
RTS 7 8 CTS
RI 9 10 NC
GPIO1：
(2.0mm Pitch 2x5 Pin Header), General-purpose input/output port, it provides a group of
self-programming interfaces to customers for flexible use.
Signal Name Pin# Pin# Signal Name
Ground 1 2 NC
NC 3 4 SMB_DATA_R
SMB_CLK_R 5 6 ICH_GPIO13_IN1
ICH_GPIO24_IN2 7 8 ICH_GPIO26_IN3
ICH_GPIO27_IN4 9 10 +5V
JTAG：
(2.0mm Pitch 2x5 Pin Header), Reserve.
JP1：
(2.0mm Pitch 1x2 Pin Header), Reserve.
JP2：
(2.0mm Pitch 1x2 Pin Header), Reserve.
CAN12：
(3.5mm Pitch 1x10 Pin connector), it provides two CAN-bus Interface.