2 osd controls – Aplex Technology ARCDIS-107 User Manual
Page 17
ARCDIS-1XX User Manual
17
1.) If the
“RGB” is still on the top left corner of the screen, press
to enter
“Miscellaneous” and
choose
“Reset”, and then Yes, and press
. When the screen goes black, disconnect power and
repeat the above steps.
2.) If the
“RGB” is not found, disconnect the AC power cord first. Then press the
buttons
(don
’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When “RGB”
appears, repeat the above steps.
3.) Functions of OSD Keys
2.2 OSD Controls
To make any adjustment, select the following:
1. Press
(Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the (
/
or +/-) key in the menu.
3. Press
(Menu) and then choose the item with the (
/
or +/-) key.
4. Press
(Menu) and then adjust the quality with the (
/
or +/-) key.
4.) If the
“RGB” is still on the top left corner of the screen, press
to enter
“Miscellaneous” and
choose
“Reset”, and then Yes, and press
. When the screen goes black, disconnect power
and repeat the above steps.
5.) If the
“RGB” is not found, disconnect the AC power cord first. Then press the
buttons
(don
’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When “RGB”
appears, repeat the above steps.
6.) Functions of OSD Keys