Denon RCD-N7 - Manual (Page 41)

37
Getting Started
Connections
Basic Operations
Advanced Operations Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
ENGLISH
Using the cursor buttons
1 Display the screen for inputting characters.
2 Use o p to set the cursor to the character you want
to change.
3 Use ui to change the character.
• The types of characters that can be input are as shown below.
G Upper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GSymbolsH
! “ # $ % & ‘ ( ) z + , - . / : ; <
= > ? @ [ \ ] ^ _ ` { | }
˜
GNumbersH 0123456789 (Space)
• The input character type can be switched by pressing [MODE]
while the display name is being changed.
n Other buttons
• Press [8] to delete the character.
• Press [9] to insert a space.
4 Repeat steps 2 and 3 to change the name then press
[ENTER] or < 1 / 3 ENTER> to register it.
Auto power on
When the power is in standby, the power turns on when any of
the buttons below other than
ON/STANDBY is operated, and the
respective operation is performed.
•
<5> ............... The disc tray opens.
• [1 / 3] ............ Playback of the “CD”, “iPod” or “USB” starts.
• [TUNER] ........ Playback of the tuner starts.
• [CD] ............... The input source switches to “CD” and the disc starts
playing.
• [iPod] ............ The input source switches to “iPod” and the iPod
starts playing.
• [USB] ............. The input source switches to “USB” and the USB
starts playing.
Other functions
Last function memory
This stores the settings as they were immediately before going into
the standby mode.
When the power is turned back on, the settings are restored to as
they were immediately before going into the standby mode.
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to their
default values.
1 Unplug the power cord.
2 Plug the power cord into a power outlet while pressing
<VOLUME d> and <VOLUME f> simultaneously.
“Initialized” is displayed.
If “Initialized” does not display in step 2, start over from step 1.