Argox AME-3230 Series - Manual (Page 12)

23
AME Series User’s Manual
5. Pull down the top of the Belt Strap to fix onto the lock:
24
AME Series User’s Manual
Controls & Connections
Self-Test before Connecting
After the Battery is charged and media is loaded, before connecting
the printer to a computer or a portable data terminal, perform a printer
self-test label to verify that the printer works properly:
Printing a Self-Test Label
 Press the Power Switch to turn off the printer.
 Make sure the Battery is installed, and media is loaded.
 Press and hold the Feed Button, and then press the Power
Switch to turn on the printer.
 After printer starts to print, release the Feed Button.
 Wait until printer finishes printing, press the Power Switch or
Feed Button to resume normal printing mode.
Note: For more information on self-test printouts, see
Page 30. Troubleshooting – Printing a Configuration Report