Level of automatic control – Dodge 2007 HB Durango User Manual

Page 236

Advertising
background image

located in the overhead console to measure the tem-
perature of the driver and passengers. Based on the
sensor input, the system will automatically ocntrol
comfort by varying the temperature, fan speed, and
mode. This maintains a comfortable temperature, even
under changing conditions. It is important that objects
are not blocking the infrared sensor. It is also impor-
tant that objects are not used that may scratch or
damage it in any way.

Level Of Automatic Control
72°F (22°C) is the recommended setting for maximum
comfort for the average person, however, this may vary.

NOTE:

The temperature setting can be adjusted at any

time without affecting automatic control operation. It is
not necessary to move the temperature setting for cold or
hot vehicles. The system automatically adjusts the tem-
perature, mode and fan speed to provide comfort as
quickly as possible.

NOTE:

In cold weather, the fan will not turn on in

AUTO mode until the engine coolant has warmed up
sufficiently. This is indicated by the WARM UP DELAY
message on the display.

NOTE:

The temperature can be displayed in U.S. or

Metric by selecting the US/M customer programmable
feature. Refer to the

ЉOverhead Console-Customer Pro-

grammable Features.

Љ The mode will also be shown in the

display and will change as required during automatic
operation.

NOTE:

The system can be put into recirculate mode

without affecting ATC operation. This will prevent out-
side air from entering the vehicle. Use this mode to
temporarily block out any outside odors, smoke, or dust.

236

INSTRUMENT PANEL AND CONTROLS

Advertising
This manual is related to the following products: