DXG Technology DXG-228 User Manual
Page 19
18
●
Close and lock the battery cover.
NOTE: Gently open the cover to avoid damaging the
battery compartment cover.
※
If the battery power indicator displays only one black
block, there is insufficient power for the flash.
※
When the battery indicator turns red, the power level
is too low to record images.
※
The camera’s date and time are stored for
approximately 3 minutes during battery change.
Double-check the date and time after replacing
batteries.
5-3 Loading and Removing the
Memory Card
●
Turn off the camera.
1. Locate the memory card slot.
●
Insert the memory card as indicated by arrow.
2. Removing the Memory Card
●
Gently depress the memory card, then release.
●
The memory card should pop up automatically.
Remove the memory card.
Attention:
If the memory card is full or contains other images you
don’t want to keep, you can press the Mode Button