English – ARRIS 2247-N8-10NA Quick Start Guide User Manual

Page 19

Advertising
background image

19

ENGLISH

Ethernet

1,2,3,4

•

Make sure you are using the Ethernet cable, not the DSL cable. The Ether-
net cable is thicker than the standard telephone cable.

•

Make sure the Ethernet cable is securely plugged into the Ethernet jack on
the PC.

•

Make sure the Ethernet cable is securely plugged into the Ethernet port on
the DSL Gateway.

•

Try another Ethernet cable if you have one available.

•

Make sure you have Ethernet drivers installed on the PC.

•

Make sure the PC’s TCP/IP Properties for the Ethernet Network Control
Panel is set to obtain an IP address via DHCP.

•

Make sure the PC has obtained an address in the 192.168.1.x range. (You
may have changed the subnet addressing.)

•

Make sure the PC is configured to access the Internet over a LAN.

•

Disable any installed network devices (Ethernet, HomePNA, wireless) that
are not being used to connect to the DSL Gateway.

Advertising