ART Pro Audio ProSplit - Transformer Isolated Mic Splitter - Manual (Page 8)

SPECIFICATIONS:
Frequency Response:
20Hz to 20kHz, ±0.25dB @
-15dBu [email protected]
THD: <0.26% from 20Hz to 20kHz
–15dBu input
<0.1% from 45Hz to 20kHz,
–15dBu input
0.002% Typical @ 1kHz,
-15dBu Input
Phase Shift: <10
° @ 20kHz (Ref, 1kHz)
Input Impedance: >1.1k Ohms @ 1kHz
(Typical driving source
impedance is 150 Ohm)
Output Impedance: < 255 Ohms @ 1kHz
(Typical output load
impedance is 1k Ohm)
CMRR: >105dB @ 60Hz /
>80dB @ 3kHz
Voltage Insertion Loss: Approximately 2dB @ 1kHz
Maximum Input Level:
-1.4dBu @ 20Hz/+3.5dBu
For 1% THD @ 30Hz / +9.4dBu @ 50Hz
Dimensions HxWxD(in): 1.85 x 4.6 x 3.5
HxWxD(mm): 47 x 117 x 89
Weight (lbs/kg):
0.9 / 0.4
NOTE: All measurements made from the TRANSFORMER
ISOLATED MICROPHONE OUTPUT with PAD SWITCH out
(off) and 150 Ohm balanced source feeding MICROPHONE