Rear tail, stop, turn signal, side marker and, Backup lights – Dodge 2008 RT Caravan User Manual
Page 486
Advertising
![background image](/manuals/75492/486/background.png)
Rear Tail, Stop, Turn Signal, Side Marker and
Backup Lights
1. Raise the liftgate.
2. Remove the tail light assembly by removing the two
screws from the inboard side. Use a fiber stick or similar
tool to gently pry the light on the outboard side to
disengage the two ball studs.
NOTE:
• If a screwdriver is used, make sure a soft material is
placed between the vehicle body and tool so not to
scratch the paint.
• The PRY location is best closest to the studs while
dislodging them separately.
Removing Tail Light Assembly
484
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: