Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 27)

About this Manual
ATCA-7365 Installation and Use (6806800K65N) 27
Summary of Changes
Part Number Publication Date Description
6806800K65N November 2014 Updated the Figure "Location of Critical Temperature Spots
(Blade Top Side)" on page 53 .
6806800K65M May 2014 Re-branded to Artesyn template.
6806800K65L February 2014 Updated Table 3-1 on page 77 and Table 9-8 on page 284 .
Updated Table 8-33 on page 264 and Table 8-34 on page
265 .
Updated Table "Environmental Requirements" on page 51 .
6806800K65K February 2013 Updated Table 2-4 on page 59 , Switch Settings
6806800K65J January 2013 Updated Standard Compliances on page 40 .
6806800K65H April 2012 Updated Table 2-3 , Table 2-4 , and DIMM Memory Modules on
page 61 . Updated Table 6-71 , Using ipmitool on page 231 ,
and Table 8-16 .
6806800K65G March 2012 Added a Notice in Installation on page 30 and Installation on
page 34 .Updated Table 2-4 .
Updated EMC on page 29 and EMV on page 34 .
6806800K65F September 2011  Updated Figure "Location of AdvancedTCA Connectors"
on page 88
 Chapter 3, Serial Interface Connector, on page 80
 Chapter 3, USB Connectors, on page 81
 Added Chapter 4, iSCSI Setup for Base and Fabric Ethernet .
 Edited Table "Sensor Data Records" on page 284
6806800K65F August 2011 Updated Serial Interface Connector on page 80
6806800K65E December 2010  Updated BIOS on page 95
 Updated Figure 1-2 on page 44
 Added Sensor Data Records information in Table
"Sensor Data Records" on page 284
 Updated Figure 2-1 on page 53