Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 24)

ATCA-7470 Installation and Use (6806800P15K)
About this Manual
24
About this Manual
6806800P15G January 2014 Updated Table "Environmental Requirements" on page 47 . Added a
new chapter Chapter 8, Boot Bank Selection , Updated section Artesyn
Specific Commands on page 225 , and Updated sections EMC on page
25 and EMV on page 30 .
6806800P15H January 2014 Updated Table "Blade Variants" on page 42 , Table "Critical Temperature
Limits" on page 49 and Table "Power Requirements" on page 50 .
Updated Processor on page 124 .
6806800P15J May 2014 Re-branded to Artesyn.
6806800P15K October 2014 Updated Figure "Serial Number Location" on page 41 , Figure "ATCA-
7470 Blade Layout" on page 52 , Figure "Face Plate" on page 67 , Figure
"Location of MO297 SSD Module Connector" on page 73 , Figure
"Location of AdvancedTCA Connectors" on page 75 , and Figure
"Location of Temperature Sensors" on page 261 with ELMA variant
figures.
Updated the installation and removal steps in
Installing and Removing
the Blade on page 61 as per ELMA variant handle usage.
Part Number Publication Date Description