Artesyn COMX-P4080-2G-ENP2 Installation and Use (August 2014) - Manual (Page 19)

Chapter 1
COMX-P4080-2G-ENP2 Installation and Use (6806800P63B) 19
Introduction
The COMX-P4080-2G-ENP2 is a COM Express module based on the Freescale Power PC P4080
platform.This board provides some of the universal interfaces such as Gigabit Ethernet, USB,
PCIE, and so on.
1.1 Features
Following are the features of the COMX-P4080-2G-ENP2:
 Form Factor: Basic (95mm x 125mm) Bullet list 2
 P4080 CPU supported
 Boot Options:
– 16 bits width NOR flash from local bus (standard product default)
– NAND flash from local bus
– I2C EEPROM
 Operating System:
– Linux
– VxWorks
 (P4080) dual channel laid down DDR3, 1GB per channel, ECC (with option to populate only
one channel (top) at 2GB)
 (P4080) 16 lanes of SERDES routed to COME connectors, which can be configured as PCIE,
XAUI, SRIO, SGMII
Selectable via carrier.
VxWorks is only a plan rather than requirement Supported CPU: P4080.