4 monitoring commands, 1 show-monitor-id – Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (May 2014) User Manual
Page 70
Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49C)
70
5.4
Monitoring Commands
The following list of commands are used for management of the InService Monitoring
functionality of ViewCheck.
5.4.1
show-monitor-id
show-monitor-id
command displays the list of parameters that are monitored using the
InService Diagnostic. This command displays default monitor ID values of the parameters also.
Syntax for CLI
show-monitor-id
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>vee0-{Dev Cat}</Name>
</Object>
<Method>showMonitorId</Method>
</InvokeMethod>
</Script>]]>]]>
Execute all commands related to monitors only after entering the specific device category
mode.
This command displays a list of monitors, if supported, only in that particular device
category.