Avalon Firestyles Bed & Breakfast - Manual (Page 9)

Operation 9
© Travis Industries 4140312 100-01305
Location of Controls
Direct Operation
The fireplace may be directly operated from the battery holder (accessed by removing the face). The three
positions are below:
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings).
REMOTE – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the IFC “remembers” the last
setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings.
The thermostat and burner on/off operating functions will not work on the transmitter.
ON REMOTE OFF
Swing the access door and
control cover down to access
the battery holder / switch.
Most features will be controlled
by the included remote.
°F
ON REMOTE OFF