Avalon Firestyles 864 See-Thru GS2 Installation - Manual (Page 76)

76 Optional Equipment
(for qualified installers only)
© Travis Industries 4141208 100-01404
16. Disconnect the IPI/CP switch from IPI/CP wires. Attach one of the jumper wires to the two wires.
Discard the IPI/CP switch.
17. Remove the IPI/CPI switch and place aside (may be kept for spare parts).
18. Connect the accent light wires to the GSR2 IFC.
NOTE: If using a blower, connect the power input to the GSR2 IFC.
19. Connect the battery box power molex connector to the main harness molex connector.