Avery Dennison Monarch 9416 XL Printer Equipment Manual - Manual (Page 13)

13. Press the FEED button. The indicator light should be GREEN.
14. Calibrate the supply, if necessary. See “ Calibrating the Supply ,” for more
information.
L o a d i n g L a b e l s f o r P e e l M o d e
Peel mode separates the label from the backing paper while printing.
Note: The minimum label length for peeling is 0.75- inches (19 mm). Hold the
leading edge of peeled labels when printing on supply longer than six inches.
1. Press the cover release levers (located on each side of the printer) towards the
front of the printer to release the cover.
2. Lift open the cover.
3. Pull out the peel door located on the front of the printer to display the peel roller
and the peel bar.
Peel Door
Peel Bar
Peel Roller
Loading Supplies & Printing 2-5