Avery Dennison Monarch 9864 Description of Commands - Manual (Page 59)

10/07 Rev. AA MANUAL EASY PLUG Commands
All devices
A = TTX 600 --TLX 604 – Eagle B = TTX 300 Offline -- Cobra Offline D = TTX 300 Online –TTX 207 -- Cobra Online – Da Capo
E = TTX 450/650/674/675/950/1050 – Puma/Puma plus/Lion/Lion plus/Tiger/Tiger XXL -- S45/65/95/105 -- TDI/STDI/XXTREME
G = TTX 350 – Ocelot – TTK – Texxtile H = 64-xx –Chess x –TT4 – DPM – PEM – ALX 92x – AP 4.4/5.4
59
P
#PA Offset print start
Definition Offsets the beginning of the print range by the given value. Select
autoeconomy mode to lift the print head while the material is being fed to
the print range.
The command must be sent before the command #IM!
Syntax #PAa/b Groups E, G, H
a = num Offset in mm from the physical start of the label until the print start
b = num Length of the range to be printed
Example
#PA400/100 Length of the print area 100 mm,
offset 400 mm from where the label
starts
#IMSB/100/600 Label width 100 mm,
total length 600 mm
Feed
Zero point
label
DEMO TEXT
DEMO TEXT
DEMO TEXT
DEMO TEXT
a
Zero point
print area
b