2 inserting label material, 1 prerequisites, 3 . 2 i n s e r t i n g l a b e l m a t e r i a l – Avery Dennison ALS 104 User Manual
Page 29: Als 104 gb
Advertising
25
3.2 I
NSERTING
LABEL
MATERIAL
ALS
104
GB
3.2.1
Prerequisites
The label dispenser is turned off at the main switch
– Standard machine: switch set to “O” [28A]
– Machine with dust/splash guard: switch does not
£
Check that the safety installations are working
properly.
£
Inspect the machinery for any visible damage.
Report any ascertained defects immediately.
£
Remove any unnecessary materials and objects
from the operating area of the unit.
£
Ensure that only authorised persons are within the
operating range of the machine.
£
Use the required personal protective equipment
correctly; forexample, wear a hairnet, safety
glasses.
[28] Main switch (A) on the housing.
[29] Main switch on ALS 104 with dust/splash guard option.
A
A
3.2
INSERTING LABEL MATERIAL
Advertising