Avery Dennison ALX 924 Setup Manual - Manual (Page 7)

06/06 Rev. 3.05-01 OPERATING MANUAL Setup
ALX 92x
7
Inserting a new label roll
1. Turn thumb screw [3A] loose and swivel
guide rod [3B] aside.
2. Push the material roll onto the unwinder
[3C] with the appropriate adapter rings.
The material roll should turn in an anti-
clockwise direction when unwinding.
3. Swivel guide rod to the unwinder axle as
illustrated [3] and shift it close to the mate-
rial roll. Tighten the thumb screw again.
4. Lay the material around deflection rollers
[4A] and dancer arm [4B].
P Continued overleaf
[3] ALX 92x with half used up label roll.
A
B
C
[4] Threading the label material around deflection rollers (A)
and dancer arm (B).
A
A
B