Avery Dennison 6037 Read This First - Manual (Page 2)

2. Press the latch buttons and open the supply cover.
Loading for Non-Peel Mode
3. Open the spring-loaded supply holder and place the
supply roll in the supply holder so that the supply
feeds from the bottom.
4. Feed the supplies the applicator
roller and the label deflector.
under
over
Cover
Supply Holder
1.
6032:
6037:
Turn on the printer and put into load mode.
Press Load key.
Press Function and 0 (zero.)
Or, ask your System Administrator.
Latch Buttons Applicator
Roller
Label Deflector
5. C
.
lose the cover and press ESC
to exit