Avery Dennison 9430R Operator Handbook - Manual (Page 8)

1-2 Getting Started
B a t t e r y a n d S a f e t y I n f o r m a t i o n
The printer is powered by a 6.0V Nickel Metal Hydride
(NiMH) battery.
♦ Charging time in the printer is approximately
1.5 hours.
♦ Take the battery out of the printer when storing the
printer for long periods of time.
♦ The battery storage temperature is 40
°
F to 104
°
F
(4
°
C to 40
°
C). Do not store a fully charged battery
at temperatures greater than 104 ° F (40 ° C) for long
periods of time. The battery may permanently lose
charge capacity.
♦ Be sure to use a fully charged battery before long
or battery-intensive printing sessions. Certain
operations (for example, printing receipts with a lot
of bar codes and graphics or using Bluetooth) drain
the battery more quickly than others.
♦ Disposal information – Do not throw in trash.
Dispose according to your local regulations or
recycle the battery. Batteries can also be returned
postage-paid to: ERC; 200 Monarch Lane Door
#39; Miamisburg, OH 45342.
CAUTION
Do not disassemble, short circuit, heat
above 80
°
C, or incinerate. The
battery may explode.
♦ The recommended temperature for charging is
68
°
F (20
°
C) to 77
°
F (25
°
C).
NOTE: Optimal battery performance is achieved after
using the battery until it is completely drained
and recharged five times.