Avery Dennison 9850 Addendum Version 3.0 - Manual (Page 5)

5
Once the script is enabled, you will see
Print Mode
S Ready
The “S” in the lower left-hand corner of the screen indicates the printer has a script
loaded and enabled (the script is running).
Viewing Script Information
To view the script information (name and version number):
1. From the Script Menu, press l or r until you see
SCRIPTS
l Script Info r
2. Press Enter/Pause. What you see depends on the script. If a script is not
present, you see a message “No script loaded.” If a script is present, you see
the version number, script name, or both.
Deleting a Script
To delete a script:
1. From the Script Menu, press l or r until you see
SCRIPTS
l Delete Script r
2. Press Enter/Pause.
Are you sure?
l Yes
3. Use l or r to select either “Yes” or “No” and press Enter/Pause. Selecting
“Yes” deletes the current script.
The flash memory used by the script is not available for other
scripts or fonts until the flash memory is reformatted.
However, when you format flash memory, you must resend the
script and any downloaded fonts to the printer.