Avery Dennison 9840 Addendum - Manual (Page 2)

2
Lower DIP Switches
♦ If the printer will be unused for extended periods of time, we recommend
leaving the printhead unlatched.
P r i n t i n g L i n e r l e s s L a b e l s
To print linerless labels, set the DIP switches on the
back of the printer as shown:
Lower DIP Switches
Switch
Description 5 6 7 8
Black Mark Supply OFF ON
Thermal Direct ON
On-Demand Mode ON
You must use thermal direct and black mark supplies for linerless
applications. The linerless printer must use on-demand mode.
For maximum platen roller life, use only wide or only narrow supplies.
Switching between wide and narrow supplies may lead to uneven platen roller
wear and possibly reduce the platen roller life. Narrow supplies are two
inches wide or less. Wide supplies are greater than two inches.
To prevent jams, do not leave the printhead closed (in the
locked position) longer than 30 minutes without printing.
Open (unlock) the printhead before a break period, at the
end of each shift, and at the end of each day.