Rear tail, stop, turn signal, and backup lamp, Dealer service – Dodge 2011 Nitro User Manual
Page 435
Advertising
![background image](/manuals/75568/435/background.png)
Rear Tail, Stop, Turn Signal, and Backup Lamp
1. Open the lift gate.
2. Remove the two push pins.
3. Pull lamp straight back and disconnect electrical con-
nection.
4. Remove the two screws attaching the backplate to the
lamp assembly.
5. Pull the backplate straight back from the lamp hous-
ing.
6. Disconnect the electrical connector.
7. Remove the bulb from the backplate.
Push Pins
434
MAINTAINING YOUR VEHICLE
Advertising