Dodge 2010 Avenger - Manual (Page 166)

The system allows the driver to select information by
pressing the following buttons on the instrument panel
switch bank located below the climate controls:
Press and release the MENU button to advance
the display to Trip Functions or Personal set-
tings or to return to the default System status
display.
Press and release the STEP button to advance
the display through the various Trip Functions
or Personal settings.
Press and release the COMPASS button to
display the compass heading and the out-
side temperature.
Press and release the RESET button to accept a
selection. The RESET button also resets various
Trip Functions.
Electronic Vehicle Information Center (EVIC)
Displays
When the appropriate conditions exist, the EVIC displays
the following messages.
• Turn Signal On (with a continuous warning chime
after one mile traveled)
• Left Front Turn Signal Light Out (with a single chime)
MENU
Button
STEP
Button
COMPASS
Button
RESET
Button
4
UNDERSTANDING YOUR INSTRUMENT PANEL 165