Rearming the system, To arm the system, Replacement keys – Dodge 2010 Avenger User Manual

Page 19: Customer key programming

Advertising
background image

Rearming The System

If something triggers the alarm, and no action is taken to
disarm it, the Vehicle Security Alarm will turn off the
horn after three minutes, turn off all of the visual signals
after 15 minutes, and then the Vehicle Security Alarm will
rearm itself.

To Arm The System

1. Remove the keys from the ignition switch and get out
of the vehicle.

2. Lock the door using either the power door lock switch
(one door must be open) or the LOCK button on the
Remote Keyless Entry (RKE) transmitter (doors can be
open or closed), and close all doors.

NOTE:

The Vehicle Security Alarm will not arm if you

lock the doors with the manual door lock plungers.

3. The Vehicle Security Light in the instrument cluster
will flash for 16 seconds. This shows that the Vehicle
Security Alarm is arming. During this period, if a door is
opened, the ignition switch is turned ON, or the power
door locks are unlocked in any manner, the Vehicle
Security Alarm will automatically disarm.

NOTE:

• During the 16 second arming period, if a door is

opened or the ignition switch is turned ON, the
Vehicle Security Alarm will automatically disarm.

• Once armed, the Vehicle Security Alarm disables the

unlock switch on the driver door trim panel and
passenger door trim panel, the trunk release button on
the instrument panel, and the HomeLink

௡/Garage

Door Opener (if equipped).

18

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: