Dual IPLUG XD642W - Manual (Page 6)

6
XD642W OPERATION
General Operation
In tuner mode, press and hold DISP then press TUNE ll
to select function priority display. “FREQ” will momentarily
appear in the display.
Note:
"FUNC" will appear in CD or AUX modes.
Radio frequency (tuner mode), CD track/elapsed time (CD
mode) or AUX (AUX mode) will be displayed by default.
Clock is accessed by pressing DISP momentarily.
Press and hold DISP then press TUNE nn to select time
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency
or CD track/elapsed time is accessed by pressing DISP
momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to select clock
priority on/off. “CLK ON” or “CLK OFF” will momentarily
appear in the display. Clock is accessed by pressing DISP
momentarily.
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
The reset button is located behind the faceplate.
Press and hold rotary encoder for 3 seconds to turn
confirmation beep on/off.
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
Programmable Display
Priority
Programmable Clock
Priority
Reset
Confirmation Beep
Mute