Awind wePresent WiPG-2000 Quick Install Guide - Manual (Page 8)

WiPG-2000
Quick Installation Guide
6
7. DoWiFi for Windows
• Do Not Support Windows Phone, Windows RT
• 7.1 Install the application
1) Make sure your PC WiFi is enabled already, and connect your
PC to wePresent WiPG-2000 box through WiFi. You can find the
WiFi name of your WiPG box information on the start/standby
page.
2) Launch your browser and enter the Device Host Name (SSID)
or IP address in the browser. You can find the IP address and
Host Name (SSID) on the projector/display screen.
(Default Host Name (SSID) is WiPG-2000-xxx, Default IP is
192.168.100.10)
3) Download the wePresent software for “XP/Vista/Windows 7/8”
and install on your PC. (Ps. You can also launch the application
from USB token directly.)