Awind WIGA / WGA-510 Quick Install Guide - Manual (Page 7)

WGA-510
Quick Installation Guide
5
4) Launch WPS client and connect to WPS receiver.(Make sure your
personal firewall allows WPS software to pass through.)
5) Enter the CODE and you can see the Code on the projector
standby screen.
6) Click the button to start full screen projection, or choose
one of the numbers (1 to 4) to project to the split screen.
7) Connect the USB input devices to WPS to select and control the
PC/Mac remotely.
7. DoWiFi for Mac
1) Enable your WiFi and connect
to WPS WiFi network
2) Open your browser and enter the Device Host Name (SSID) or IP
address on browser. You can find the IP address and Host Name
(SSID) on the projector screen. (Default Host Name (SSID) is WPS,
Default IP is 192.168.100.10)