Axel AX3000 70W Installation Guide - Manual (Page 7)

Notices
1 - NOTICES
1.1 - SAFETY NOTICES
 Do not attempt to fix an AX3000 component failure by opening the terminal
case. In case of hardware failure, contact your service representative.
 Check AC voltage from the wall outlet is compatible with the AX3000 external
power.
 The power socket must be within easy reach and as near as possible to the
AX3000 Terminal.
 Make sure all devices are powered off before connecting or disconnecting.
 In order to ensure compliance with European EMC regulations (EN 55022),
shielded cables must be used when interfacing with other devices.
 Refer to the respective supplier’s installation manual for instructions on
connecting the keyboard and monitor.
1.2 - EMC NOTICES
 In order to ensure compliance with European EMC regulations (EN 55022)
and FCC Part 15 rules, it is required that shielded cables be used when
interfacing with other devices (peripherals or computers).
 This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
Installation Guide - Models 70 1