Datalogic Scanning I GD4100 User Manual

Page 211

Advertising
background image

Interleaved 2 of 5 (I 2 of 5)

Product Reference Guide

209

Interleaved 2 of 5 (I 2 of 5) — cont.

2 of 5 Decoding Level

NOTE

Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to
very conservative depending on a particular customer’s needs.

•

Choosing Level 1 results in a very conservative decoder at the expense of not being able to
read poorly printed or damaged labels.

•

Choosing Level 5 results in a very aggressive decoder. This aggressive behavior allows
decoding of poorly printed and damaged labels at the expense of increasing the likelihood
of decoding errors.

•

Choosing Level 3, which is the default setting, allows the majority of product labels to be
decoded.

There are many factors that determine when to change the decoding level for a particular
symbology. These factors include spots, voids, non-uniform bar/space widths, damaged labels,
etc. that may be experienced in some barcode labels. If there are many hard to read or damaged
labels that cannot be decoded using a conservative setting, increase the decoding level to be
more aggressive. If the majority of labels are very good quality labels, or there is a need to
decrease the possibility of a decoder error, lower the decoding level to a more conservative level.

This configuration item applies to Interleaved 2 of 5, Datalogic 2 of
5 and Standard 2 of 5.

Advertising