Baby Lock Enlighten (BLE3ATW-2) Instruction and Reference Guide - Manual (Page 23)

3
T
H
R
E
A
D
O
V
E
R
L
O
C
K
21
3-Thread Overlock-Narrow
B
A
It's easy to convert your Enlighten to serge a narrow seam with 3
threads by simply eliminating the left needle.
To convert to narrow 3-thread overlock (3.0-3.5mm), cut the left
needle thread (fig. A). Remove the left needle and left needle thread
completely from the machine.
Tighten the needle clamp screw slightly to prevent the screw from
working out (fig. B).
Confirm needle is in the right needle clamp position and secure the
needle clamp screw.
Move the stitch selector lever to "B".
For the right needle, 3-thread overlock sewing, follow the suggest-
ed settings and the threading diagram below.
NEEDLES
right
LENGTH
2.5-3.5
WIDTH
3.0-3.5
STITCH
SELECTOR
B
WAVE
SELECTOR
OVERLOCK