Baby Lock Maria (Previous Model) (BL23A) Instruction and Reference Guide - Manual (Page 35)

34
•
• •
1 2 3 4 0 + • S.S. • -
• Pattern Selector Dial
Raise the needle above the fabric and match the
desired pattern with the setting mark by turning
the pattern selector dial.
• Selecting Stretch Stitch Patterns
When sewing stretch stitch, set the stitch length
dial at “ S.S. ”.
• Stitch Length Dial
• Place the desired number at the setting mark by
turning the stitch length dial.
• The higher the number, the longer the stitch
length.
• “ ” is the correct setting for buttonhole
stitching.
• Adjust the dial in the 0.3 to 4 range when you sew
the zigzag stitch.
• Place S.S. at the setting mark to sew the
stretch stitch pattern correctly.
• If forward and reverse feeding becomes unbalanced
due to the type of fabric, adjust the balance as
follows:
If patterns are compressed, turn the dial toward
“ + ”.
If patterns are drawn out, turn the dial toward “ – ”.
•
Stitch Width Dial
Turn the stitch width dial to set the desired stitch
width at the setting mark.
The higher the number, the wider the stitch width.
Note :
Raise the needle above the fabric, when you turn
the stitch width dial.
• Variable Needle Positions
Select straight stitch “A” and turn the stitch width dial
for needle positions ranging from the center (when
set on 5) to the left position (when set on 0).