Dual XD5220 - Manual (Page 7)

7
XD5220 OPERATION
Tuner Operation
Press TUNE << or >> momentarily to seek the next strong
station.
Press TUNE << or >> for more than 2 seconds, then release.
“MANU” will momentarily appear in the display. Press TUNE
<< or >> momentarily to move radio frequency up or down one
step at a time. Press and hold to advance quickly. If tuning is not
adjusted for 5 seconds, the unit will return to seek tuning mode
(default). “AUTO” will momentarily appear in the display.
Press SCAN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCAN again to cancel.
Press LOC to activate local tuning for strong FM station reception
only. Press LOC again to cancel and resume distance tuning
(default).
Press MO/ST for more than 2 seconds during FM tuner operation
to select mono or stereo (default) reception of the broadcast
signal.
Press BAND to select between FM1, FM2, FM3 and AM1,
AM2 bands.
Press and hold BAND then press TUNE << to select European
frequency spacing. Press and hold BAND then press TUNE >>
to select U.S. frequency spacing (default). Anytime frequency
spacing is changed, all station presets are erased.
Up to 18 FM stations and 12 AM stations can be stored. To store
a station, select the desired band and station. Press and hold
the desired preset button for more than 2 seconds. When stored,
the preset number will appear in the display. The station can be
recalled anytime by pressing the corresponding preset button.
Press AS/PS for more than 2 seconds to automatically store the
six strongest stations in the current band.
Press AS/PS for less than 2 seconds to scan presets 1-6 on the
current band, pausing for 5 seconds at each. Press AS/PS again
to cancel.
Seek Tuning
Manual Tuning
Scan Tuning
FM Local/Distance
FM Mono/Stereo
Band
Frequency Spacing
Storing and Recalling
Station Presets
Automatically Store
Stations
Preset Scan