Using the elle tens+ in pelvic mode, Entering pelvic mode – Babycare TENS Elle TENS User Manual
Page 29

Display
29
Press
Using the Elle TENS+ in PELVIC mode
+
Opti
Max
Mode
Mode
Entering PELVIC mode
a). Switch the unit ON by pressing the On/Off Button. Note that your Elle
TENS+ will always start up in last previously used mode.
You need to select ‘PELVIC’.
b). If the unit does not already display ‘PELVIC’ press the Opti-Max Key to cycle
through the 3 available modes, (BIRTH, PAIN, PELVIC) until ‘PELVIC’ flashes
at the top of the display as shown in the diagram.
c). Press the Mode Button to confirm ‘PELVIC’ mode, otherwise your Elle TENS+
will automatically enter PELVIC mode after a few seconds. To select another
mode you must first turn off the unit and follow instructions from a) above.
Select the Programme most appropriate for your type of incontinence by
pressing the Mode Button (refer to page 27 for Programme descriptions).
Programme
Duration
How often?
PROG 1
30 mins
Once or twice a day
PROG 2
30 mins
Once a day or every other day depending on severity
PROG 3
45 mins
Complete the programme once a day
PROG 4
45 mins
At your discretion