Owner’s manual, Product identification local codes, Unpacking – Desa S26NT User Manual

Page 3: Product features

Advertising
background image

3

105683

OWNER’S MANUAL

For more information, visit www.desatech.com

PRODUCT
IDENTIFICATION

LOCAL CODES

Install and use heater with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code, ANS Z223.1,
also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

This heater is designed for vent-free opera-
tion. State and local codes in some areas
prohibit the use of vent-free heaters.

Figure 1 - Vent-Free Natural Gas Stove

UNPACKING

1.

Remove top inner pack.

2.

Tilt carton so that stove is upright.

3.

Remove protective side packaging.

4.

Slide stove out of carton.

5.

Remove protective plastic wrap.

6.

Remove screen by lifting and then pull-
ing forward.

7.

Remove log set by cutting plastic ties.

8.

Carefully unwrap log.

9.

Check for any shipping damage. If
stove or log is damaged, promptly in-
form dealer where you bought stove.

PRODUCT
FEATURES

SAFETY PILOT

This heater has a pilot with an Oxygen Deple-
tion Sensing (ODS) safety shutoff system.
The ODS/pilot is a required feature for vent-
free room heaters. The ODS/pilot shuts off
the heater if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This heater has a piezo ignitor. This system
requires no matches, batteries, or other
sources to light heater.

Heater Controls
(Inside Door)

Screen

Stove
Cabinet

Logs

Advertising