Operation, Fireplace installation, Electric fireplace manual control – Dimplex DF3033ST User Manual

Page 10

Advertising
background image

10

www.dimplex.com

Fireplace Installation

Place all connectors inside

the unit and secure the junction

box cover to unit. Ensure that the

cable clamp grips only the jacket

of service cable.

CAUTION:

Clearance for

air circulation beneath the

fireplace insert is provided by

two (2) rubber feet.

Do not install the fireplace

insert directly on carpet or

similar surfaces which may

restrict air circulation.

If installing the fireplace in a

carpeted area, place a one-

piece, solid, flat surface under

the fireplace insert. Ensure

that both of the insert’s feet

rest securely on this surface.

Operation

Electric Fireplace Manual

Control

The manual controls for the

fireplace are located in the upper

right hand corner (Figure 4).

A. Main On/Off Switch
Supplies power to the 3 Position

Manual Control Switch.

B. 3 Position Manual Control

Switch
Remote (left position):
The

unit is operated with the remote

control.
Flame (center position): The

flame effect is turned on.
Flame & Heat (right position):

The flame effect and heater are

turned on simultaneously. When

the manual control is in the

Flame

& Heat position the heater does

Figure 4

a

B

C

Advertising