BAFO BF-2003 User Manual
Page 9
USB 2.0 to IDE 3.5” hard disk Enclosure User’s Manual 8
7.1.7 Connect the USB port of
USB2.0 to IDE 3.5” hard disk enclosure
to PC
with USB cable. System will auto detect the device and load the driver
then create a new device and name of “
(E:)
” at desktop as shown below.
7.1.8 After Windows
®
installed all the driver, you have to check
“My
Computer”-“Control Panel”-“System”-”Device Manager”
to make sure
the driver has already installed. Then, in the
“Disk Drives”
it will show a
“FUJITSU MHM2050AT”
(This model number will vary with different
Hard Disk)
,
in the
“Hard disk controllers”
it will show a
“BAFO Storage
Adapter Bridge Module”
, and in the
“Universal Serial Bus controller”
it
will show a new item of
“BAFO USB Storage Adapter ”
.