BAFO BF-321 - Manual (Page 7)

BF-321 USB2.0 to Ethernet Adapter User’s Manual 7
+ # , - . 1 1 1 1
Following the steps below to install driver of BF-321 USB 2.0 to Ethernet
Adapter :
6.4.1 Turn on the power of computer and make sure the USB port is enabled
and can working properly.
6.4.2 Insert the driver of BF-321 USB 2.0 to Ethernet Adapter into the
CD-ROM drive.
Select “Install Products - BF-321 USB 2.0 to Ethernet Adapter –
Install” .
6.4.3 Click the “Install” to continue.
6.4.4 Click “ Exit ” to end this installation.
6.4.5 Plug the BF-321 USB2.0 to Ethernet Adapter into USB Port of PC.
Windows® will detect an USB Device. Your new hardware is installed
and ready to use.